SSC JE Syllabus 2019, Check SSC JE Latest Exam Syllabus & Exam Pattern for Paper 1 & 2

SSC JE Syllabus 2019, Check SSC JE Latest Exam Syllabus & Exam Pattern for Paper 1 & 2: –  The Staff Selection Commission (SSC) released the SSC Junior Engineer Exam 2019 notification and invites the online application form submission from eligible candidates. Along with the notification the staff selection commission also released the Syllabus of SSC JE 2019. Here we are providing the complete syllabus of both papers of Junior Engineer. With the help of this syllabus you can prepare for exam very well. The complete syllabus and exam pattern of SSC JE Recruitment 2019 is available on our web site www.jobonweb.in. So stay updated with us.

The Staff Selection Commission is going to conduct the SSE JE Exam 2019 for recruitment of various posts of Junior Engineer for respective field. A huge number of contenders applied for SSC JE Exam 2019 . There will be two papers of SSC JE Exam 2019. The question paper will be of objective type for paper I and Conventional Type for Paper II. The Paper I will be of 200 marks and Paper II will be of 300 marks. There will be negative marking of each wrong question for paper I. The negative marking of paper I will be of 0.25 marks for each wrong question.

SSC JE Syllabus 2019

SSC JE Syllabus 2019 Short Description:

Name of Organization: Staff Selection Commission

Name of Exam: SSC JE Exam 2019

Topic: SSC JE Syllabus 2019

SSC JE 2019 Exam Pattern for Paper I:

The SSC JE Exam 2019 for Paper I will be of objective type and this test will be of Computer Based Test. The Total marks of question paper will be 200 and Time duration of question paper will be 2 Hours.  The subject of paper I will be General Intelligence & Reasoning, General Awareness, General Engineering (Civil and Structural), General engineering (Electrical) and General Engineering (Mechanical).

SSC JE 2019 Exam Pattern for Paper II

The SSC JE Exam 2019 for paper II will be of written type. The total marks of question paper will be 300 marks and time duration of paper will be 3 Hours. The subjects covered in paper 2 are General Engineering (Civil Structural) or General engineering (Electrical) or General Engineering (Mechanical). So Prepare as according to the exam pattern, this  will help you to pass the exam.

SSC JE Syllabus 2019 Subject Wise:

Subject-1. General Intelligence & Reasoning

The topic asked in this subject will be analogies, similarities, differences, space visualization, problem solving, analysis, judgment, decision making, visual memory, discrimination, observation, relationship concepts, arithmetical reasoning, verbal and figure classification, arithmetical number series etc. The test will also include questions designed to test the candidate’s abilities to deal with abstract ideas and symbols and their relationship, arithmetical computations and other functions.

Subject-2. General Awareness

The questions asked in General Awareness subject will be relating to India and it’s neighboring countries especially pertaining to History, Culture, Geography, Economic Scene, General Polity and Scientific Research etc. to answer these questions, there is no requirement of any study or coaching.

Subject-3 General Engineering (Civil and Structural), (Electrical and Mechanical)

Subject-4 For Part A: Civil Engineering

The questions asked in Part A of Civil Engineering will be from Building Materials, Estimating, Costing and Valuation, Surveying, Soil Mechanics, Hydraulics, Irrigation Engineering, Transportation Engineering, Environmental engineering, Structural Engineering, Theory of Structures, Concrete Technology, RCC Design, Steel Design.

For Part B: Electrical Engineering

The questions asked related to the topics like Basic Concepts, Circuit Law, Magnetic Circuit, AC Fundamentals, Measurement and Measuring instruments, Electrical Machines, Fractional Kilowatt Motors and single phase induction Motors, Synchronous Machines Generation, Transmission and Distribution, Estimation and Costing, Utilization and Electrical Energy, Basic Electronics.

For Part C: Mechanical Engineering

The questions will be asked for paper 1 Part C is related to Theory of machines Design, Engineering Mechanics and Strength of Materials, Properties of  Pure Substances, 1st Law of Thermodynamics, 2nd Law of Thermodynamics, Air standard Cycles for IC Engines, IC Engine Performance, IC Engine Combustion, IC Engine Cooling & Lubrication, Rank cycle of Sysem, Boilers, Classification, Specification, Fitting & Accessories of fluids, Fluid Statics, Measurement of Flow rate, basic principles, Hydraulic Turbines, Centrifugal Pumps, Classification of steels.

SSC JE Syllabus 2019 for Paper II Written Type:

Topics of Paper II:

Subject-1. Civil & Structural Engineering:

Estimating, Costing and Valuation: Estimate, glossary of technical terms, analysis of rates, methods and unit of measurement, Items of work – earthwork, Brick work (Modular & Traditional bricks), RCC work, Shuttering, Timber work, Painting, Flooring, Plastering. Boundary wall, Brick building, Water Tank, Septic tank, Bar bending schedule, Centre line method, Mid-section formula, Trapezodial formula, Simpson’s rule. Cost estimate of Septic tank, flexible pavements, Tube well, isolates and combined footings, Steel Truss, Piles and pile-caps. Valuation – Value and cost, scrap value, salvage value, assessed value, sinking fund, depreciation and obsolescence, methods of valuation.

Building Materials: the questions will be asked in Building Material Topic will be Physical and Chemical properties, classification, standard tests, uses and manufacture/quarrying of materials like building stones, silicate based materials, cement (Portland), asbestos products, timber and wood based products, laminates, bituminous materials, paints, varnishes.

Soil Mechanics: Origin of soil, phase diagram, Definitions-void ratio, porosity, degree of saturation, water content, specific gravity of soil grains, unit weights, density index and interrelationship of different parameters, Grain size distribution curves and their uses. Index properties of soils,  Atterberg’s limits, ISI soil classification and plasticity chart. Permeability of soil, coefficient of permeability, determination of coefficient of 12 permeability, Unconfined and confined aquifers, effective stress, quick sand, consolidation of soils, Principles of consolidation, degree of consolidation, pre-consolidation pressure, normally consolidated soil, e-log p curve, computation of ultimate settlement. Shear strength of soils, direct shear test, Vane shear test, Triaxial test. Soil compaction, Laboratory compaction test, Maximum dry density and optimum moisture content, earth pressure theories, active and passive earth pressures, Bearing capacity of soils, plate load test, standard penetration test.

Soil Mechanics: Origin of soil, phase diagram, Definitions-void ratio, porosity, degree of saturation, water content, specific gravity of soil grains, unit weights, density index and interrelationship of different parameters, Grain size distribution curves and their uses. Index properties of soils,  Atterberg’s limits, ISI soil classification and plasticity chart. Permeability of soil, coefficient of permeability, determination of coefficient of 12 permeability, Unconfined and confined aquifers, effective stress, quick sand, consolidation of soils, Principles of consolidation, degree of consolidation, pre-consolidation pressure, normally consolidated soil, e-log p curve, computation of ultimate settlement. Shear strength of soils, direct shear test, Vane shear test, Triaxial test. Soil compaction, Laboratory compaction test, Maximum dry density and optimum moisture content, earth pressure theories, active and passive earth pressures, Bearing capacity of soils, plate load test, standard penetration test.

Surveying: Principles of surveying, measurement of distance, chain surveying, working of prismatic compass, compass traversing, bearings, local attraction, plane table surveying, theodolite traversing, adjustment of theodolite, Leveling, Definition of terms used in leveling, contouring, curvature and refraction corrections, temporary and permanent adjustments of dumpy level, methods of contouring, uses of contour map, tachometric survey, curve setting, earth work calculation, advanced surveying equipment.

Irrigation Engineering: Definition, necessity, benefits, effects of irrigation, types and methods of irrigation, Hydrology – Measurement of rainfall, run off coefficient, rain gauge, losses from precipitation – evaporation, infiltration, etc. Water requirement of crops, duty, delta and base period, Kharif  and Rabi Crops, Command area, Time factor, Crop ratio, Overlap allowance, Irrigation efficiencies. Different type of canals, types of canal irrigation, loss of water in canals. Canal lining–types  and advantages. Shallow and deep to wells, yield from a well. Weir and barrage, Failure of weirs and permeable foundation,  Slit and Scour, Kennedy’s theory of critical velocity. Lacey’s theory of uniform flow. Definition of flood, causes and effects, methods of flood control, water logging, preventive measure. Land reclamation,  Characteristics of affecting fertility of soils, purposes, methods, description of land and reclamation processes. Major irrigation projects in India.

Hydraulics: Fluid properties, hydrostatics, measurements of flow, Bernoulli’s theorem and its application, flow through pipes, flow in open channels, weirs, flumes, spillways, pumps and turbines.

Environmental Engineering: Quality of water, source of water supply, purification of water, distribution of water, need of sanitation, sewerage systems, circular sewer, oval sewer, sewer appurtenances, sewage treatments. Solid waste management – types, effects, engineered management system. Air pollution – pollutants,  causes, effects, control. Noise  pollution – cause, health effects, control.

Transportation Engineering: Highway Engineering – cross sectional elements, geometric design, types of pavements, pavement materials – aggregates and bitumen, different tests, Design of flexible and rigid pavements – Water Bound Macadam (WBM) and Wet Mix Macadam (WMM), Gravel Road, Bituminous construction, Rigid pavement joint, pavement maintenance, Highway drainage, Railway Engineering- Components of permanent way – sleepers, ballast, fixtures and fastening, track geometry, points and crossings, track junction, stations and yards. Traffic Engineering – Different traffic survey, speed-flow-density and their interrelationships, intersections and interchanges, traffic signals, traffic operation, traffic signs and markings, road safety.

Subject-2. Structural Engineering

Concrete Technology: Properties, Advantages and uses of concrete, cement aggregates, importance of water quality, water cement ratio, workability, mix design, storage, batching, mixing, placement, compaction, finishing and curing of concrete, quality control of concrete, hot weather and cold weather concreting, repair and maintenance of concrete structures.

RCC Design: RCC beams-flexural strength, shear strength, bond strength, design of singly reinforced and double reinforced beams, cantilever beams. T-beams, lintels. One way and two way 12 slabs,  isolated footings. Reinforced brick works, columns, staircases, retaining wall, water tanks (RCC design questions may be based on both Limit State and Working Stress methods).

Theory of Structures: Elasticity constants, types of beams – determinate and indeterminate, bending moment and shear force diagrams of simply supported, cantilever and over hanging beams. Moment of area and moment  of inertia for rectangular & circular sections, bending moment and shear stress for tee, channel and compound sections, chimneys, dams and retaining walls.

Steel Design: Steel design and construction of steel columns, beams roof trusses plate girders.

Part B – Electrical Engineering

Magnetic Circuit: Concepts of flux, reluctance, Different kinds of magnetic materials, Magnetic calculations for conductors of different configuration e.g. straight, circular, solenoid, etc. Electromagnetic induction, self  and mutual induction.

AC Fundamentals: Instantaneous, peak, R.M.S. and average values of alternating waves, Representation of sinusoidal wave form, simple series and parallel AC Circuits consisting of R.L. and C, Resonance, Tank Circuit. Poly Phase system – star and  delta connection, 3 phase power, DC and sinusoidal response of R-Land R-C circuit.

Basic Concepts: Concepts of resistance, inductance, capacitance, and various factors affecting them. Concepts of current,  voltage, power, energy and their units.

Circuit Law:  Kirchhoff’s law, Simple  Circuit solution using network theorems.

Measurement & Measuring Instruments: Measurement of power (1 phase and 3 phase, both active and re-active) and energy, 2 wattmeter method of 3 phase power measurement. Measurement of frequency and  phase angle. Ammeter and voltmeter (both moving oil and moving iron type), extension of range  watt meter, Energy meter AC Bridges. Use of CRO, Signal Generator,  CT, PT and their uses. Earth Fault detection.

Electrical Machines:

1 phase and 3 phase transformers: Construction, Principles of operation, equivalent circuit, voltage regulation, O.C. and S.C. Tests, Losses and efficiency. Effect of voltage, frequency and wave form on  losses. Parallel operation of 1 phase /3 phase transformers. Auto transformers. 3 phase induction motors, rotating magnetic field, principle of operation, equivalent circuit, torque-speed characteristics, starting and speed control of 3 phase induction motors. Methods of braking, effect of voltage and frequency variation on torque speed characteristics.

Synchronous Machines: Generation of 3-phase armature reaction, voltage regulation, parallel operation of two alternators, synchronizing, control of active and reactive power. Starting and applications of synchronous  motors.

D.C. Machine: Construction, Basic Principles of D.C. motors and generators, their characteristics, speed control and starting of D.C. Motors. Method of braking motor, Losses and efficiency  of D.C. Machines.

Estimation and Costing: Estimation of lighting scheme, electric installation of machines and relevant IE rules. Earthing, practices and  IE Rules.

Utilization of Electrical Energy: Illumination, Electric heating, Electric welding, Electroplating, Electric drives and motors.

Basic Electronics: Working of various electronic devices e.g. P N Junction diodes, Transistors (NPN and PNP type), BJT and JFET. Simple circuits using  these devices.

Generation, Transmission and Distribution: Different types of power stations, Load factor, diversity factor, demand factor, cost of generation, inter-connection of power stations. Power factor improvement, various types of tariffs,  types of faults, short circuit current for symmetrical faults. Switchgears – rating of circuit breakers, Principles of arc extinction by oil and air, H.R.C. Fuses, Protection against earth leakage / over current, etc.

Part C – SSC JE Syllabus Mechanical Engineering

Engineering Mechanics & Strength of Materials: Equilibrium of Forces, Law of motion, Friction, Concepts of stress and strain, Elastic limit and elastic constants, Bending moments and shear force diagram, Stress in composite bars, Torsion of circular shafts, Bucking of columns – Euler’s and Rankin’s theories, Thin walled pressure vessels.

Theory of Machines and Machine Design: Concept of simple machine, Four bar linkage and link motion, Flywheels and fluctuation of energy, Power transmission by belts – V-belts and Flat belts, Clutches – Plate and Conical clutch, Gears – Type of gears, gear profile and gear ratio calculation, Governors – Principles and classification, Riveted joint, Cams, Bearings, Friction in collars and pivots.

Thermal Engineering: Properties of Pure Substances P-V & P-T diagrams of pure substance like H2O, Introduction of steam table with respect to steam generation process; definition of saturation, wet & superheated status. Definition of dryness  fraction of steam, degree of superheat of steam. H-S chart of steam  (Mollier Chart).

Properties & Classification of Fluid: ideal & real fluids, Newton’s law of viscosity, Newtonian and Non-Newtonian fluids, compressible and incompressible fluids.

Fluid Statics: Pressure at a point. Measurement of Fluid

Centrifugal Pumps: Classifications, Principles, Performance.

Production Engineering Classification of Steels: Mild steal & alloy steel, Heat treatment of steel, Welding – Arc Welding, Gas Welding, Resistance Welding, Special Welding Techniques i.e. TIG, MIG, etc. (Brazing & Soldering), Welding Defects & Testing; NDT, Foundry & Casting – methods, defects, different casting processes

Pressure: Manometers, U-tube, Inclined tube.

Fluid Kinematics: Stream line, laminar & turbulent flow, external & internal flow, continuity equation.

Dynamics of Ideal Fluids: Bernoulli’s equation, Total head; Velocity head; Pressure head; Application of Bernoulli’s equitation.

About SSC JE Syllabus 2019

Here we provide the complete details of syllabus of SSC Junior Engineer Exam 2019. By this syllabus you can prepare for the SSC JE Exam 2019. This syllabus will help you to prepare for the exam. So kindly refer our this syllabus to other peoples also. This syllabus is according to the  syllabus provided by the officials. Kindly read our this article SSC JE Syllabus 2019 and prepare for exam. Many Coaching and Training Institute also refer the syllabus from our website.

To know more information on SSC JE Syllabus 2019 kindly visit to the web site jobonweb.in.